Liquicap T FMI21
8 Endress+Hauser
Installation
Installation instructions Mounting location
e.g. storage area and buffer tank.
Orientation (vertical)
L00-FMI21xxx-11-05-xx-xx-000
* Metal tank
** Plastic tank
!
Note!
The probe rods should never be in contact with the tank.
!
Note!
In the case of elevated electromagnetic radiation: protective ground should be attached to the device by a
possibly short line.
Environment
Ambient temperature range Ambient temperature for the electronic: -40...70 °C
The functionality of the display may be limited for temperatures T
a
< –20 °C and T
a
> +60 °C
Ambient temperature limits -40...80 °C (in limit range: restricted accuracy)
Storage temperature -40...80 °C
Climate class Suitable for the tropics as per DIN IEC 68 Part 2-38
Degree of protection IP66
Shock resistance DIN EN 60068-2-27 / IEC 68-2-27: 30 g
Vibration resistance
(with min. rod length
150 mm)
DIN EN 60068-2-64 / IEC 68-2-64: 20...2000 Hz, 1 (m/s
2
)
2
/Hz
Electromagnetic compatibility Interference emission to EN 61326, Electrical equipment Class B;
Interference immunity to EN 61326, Annex A (Industrial)
*
**
To Next Page
Loading...
