EasyManua.ls Logo

Endress+Hauser Liquiline M CM42 - Single-Point Calibration

Endress+Hauser Liquiline M CM42
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11/16
Endress+Hauser
Kits CM42
8.2 51517504 Kit CM42:
Verschraubungen M20 PC & SS
Dieses Kit enthält folgende Teile (siehe Bild 9):
8.2 51517504 Kit CM42:
Cable glands M20 PC & SS
This kit contains following parts (see figure 9):
Beschreibung Menge Pos. Description
Quantity
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Kabelverschraubung M201,5 PA reduz. 1 St./pc. 10 Cable gland M201.5 PA reduced gray
Kabelverschraubung M201,5 PA grau 1 St./pc. 10a Cable gland M201.5 PA gray
Gegenmutter M201,5 PA grau 5 St./pcs. 11 Lock nut M161.5 PA grey
O-Ring ID17 mm W2,2 mm EPDM 5 St./pcs. 12 O-ring ID17 mm W2.2 mm EPDM
Blindstopfen PG M201,5 PA sw. 2 St./pcs 13 Blind plug PG M201.5 PA black
Kabelverschraubung M161,5 PA reduz. 1 St./pc. 20 Cable gland M161.5 PA reduced gray
Gegenmutter M161,5 PA grau 2 St./pcs. 21 Lock nut M16x1.5 PA gray
O-Ring ID13 mm W2,2 mm EPDM 2 St./pcs. 22 O-ring ID13 W2.2 EPDM
Blindstopfen PG M16/NPT
3
/
8
" PA sw. 1 St./pc. 23 Blind plug PG M16/NPT
3
/
8
" PA black
Verschlussschraube M201,5 PA sw 3 St./pcs. 30 Screw plug M201.5 PA bk
Verschlussschraube M161,5 PA sw 1 St./pc. 40 Screw plug M161.5 PA bk
Anleitung für Servicekit 1 St./pc. -- Instruction for service kit
Bild 9:
Kit Verschraubungen M20
für Kunststoff- und Edelstahlgehäuse
Figure 9:
Kit cable glands M20
for plastic and stainless steel housing
10
20
30
11
21
22
12
40
13
23
10a
11
11
11
11
12
12
12
12
13
21
22
30 30

Other manuals for Endress+Hauser Liquiline M CM42

Related product manuals