Endress+Hauser Liquiphant FTL51B - Installation; Mounting Conditions; Switch Point Consideration

Liquiphant FTL51B Installation
Endress+Hauser 11
5 Installation
L
WARNING
Loss of protection rating if the device is opened in a wet environment.
‣
Only open the device in a dry environment!
1
A0037879
 6 Installation in any position in a vessel, pipe or tank
1 Temperature spacer for tank with insulation and/or high process temperatures
5.1 Mounting conditions
5.1.1 Taking the switch point into consideration
Typical switch points, depending on the orientation of the point level switch
(water +23 °C (+73 °F))
~13 (0.5)
~4 (0.16)
~12.5 (0.49)
D
A B C
D
D
A0037915
 7 Typical switch points. Unit of measurement mm (in)
A Installation from above
B Installation from below
C Installation from the side
D Switch point