Endress+Hauser Liquiphant M FTL51C - Page 21

Liquiphant M FTL51C
Endress+Hauser 21
Position the fork so that the narrow edge of the tines is vertical to ensure that the liquid can run off
easily.
With buildup on the tank walls:
* Ensure that there is sufficient distance between the buildup expected on the tank wall
and the fork.
L00-FTL51Cxx-11-05-xx-xx-003
Vertical from above Protruding into the tank from the side
Mounting positions with low viscosity (up to 2000 mm

/s):
L00-FTL51Cxx-11-05-xx-xx-004
* Deburr the nozzle surfaces
Mounting in piping from 2"
Flow velocities up to 5 m/s at a viscosity of 1 mm

/s (16.4 ft/s) and density of 1 g/cm

. (Check function
for other medium conditions.)
L00-FTL51Cxx-11-05-xx-xx-005
*
*
(min. 1 in)
min. 25
DN 40
*
*