Liquiphant M FTL51C
Endress+Hauser 25
Mechanical construction
!
Note!
2D and 3D drawings containing individual dimensions can be generated and downloaded in the
Configurator on the product pages of the Liquiphant FTL5x at www.endress.com.
Design Summary of all electrical and mechanical versions
Housing
Plug-in electronic inserts to mount in the housing
L00-FTL5xxxx-03-05-xx-xx-001 L00-FTL5xxxx-03-05-xx-xx-002 L00-FTL5xxxx-03-05-xx-xx-003 L00-FTL5xxxx-03-05-xx-xx-004
F16
Polyester (PBT)
F15
Stainless steel
(316L)
F17/F13
Aluminum (also for
EEx d), coated
F27
Stainless steel (316L)
T13
Aluminum with separate
connection compartment (also
EEx de and EEx d), coated
L00-FTL5xxxx-03-05-xx-xx-000
FEL51:
FEL52:
FEL54:
FEL55:
FEL56:
FEL58:
FEL57:
FEL50A:
FEL50D:
Two-wire AC connection
Three-wire DC connection PNP
Universal current connection, 2 relay outputs
Output 16/8 mA for separate switching unit
Output 0.6 to 1.0 / 2.2 to 2.8 mA for separate switching unit (NAMUR)
Output 2.2 to 3.5 / 0.6 to 1.0 mA for separate switching unit (NAMUR)
Output 150/50 Hz, PFM, for separate switching unit (Nivotester)
Digital communication PROFIBUS PA
Pulse output for Density Computer FML621
Bushings
Temperature spacer and pressure tight feed-through
L00-FTL5xxxx-03-05-xx-xx-005
Process connections
Flanges* according to DIN/EN, ANSI, JIS from DN 40 / 1½"
* The following applies for DN 25/ANSI 1":
Pipe diameter (D)
24.2 mm, radius (R) 4 mm.
Take into account for counterflange!
L00-FTL5xxxx-03-05-xx-xx-009
Sensors
With extension pipe up to 3 m
or special "length L II" (see also Page 24)
Length L Length L II
L00-FTL51Cxx-03-05-xx-xx-001
To Next Page
Loading...
