Endress+Hauser Micropilot FMR10 - 2 Basic safety instructions; 2.1 Requirements for personnel; 2.2 Designated use

Product description Micropilot FMR10
8 Endress+Hauser
3 Product description
3.1 Product design
3.1.1 Micropilot FMR10
1
8
9
2
3
4 5
6
7
A0028415
 1 Design of the Micropilot FMR10 (26 GHz)
1 Sensor housing
2 Seal
3 Process connection rear side
4 Cable gland
5 Pipe adapter
6 O-ring
7 Counter nut
8 Design ring
9 Process connection front side
4 Incoming acceptance and product identification
4.1 Goods acceptance
Check the following during goods acceptance:
• Are the order codes on the delivery note and the product sticker identical?
• Are the goods undamaged?
• Do the nameplate data match the ordering information on the delivery note?
• If required (see nameplate): Are the safety instructions (XA) provided?
If one of these conditions is not met, please contact the manufacturer's sales office.
4.2 Product identification
The following options are available for the identification of the measuring device:
• Nameplate specifications
• Extended order code with breakdown of the device features on the delivery note