Endress+Hauser NRF81 - Page 141

Tankside Monitor NRF81 Operating menu
Endress+Hauser 141
• Observed density value
• Average profile density
5)
• Upper density
• Middle density
• Lower density
• P1 (bottom)
• P2 (middle)
• P3 (top)
• GP 1 ... 4 value
• AIO B1-3 value
5)
• AIO B1-3 value mA
5)
• AIO C1-3 value
5)
• AIO C1-3 value mA
5)
• AIP B4-8 value
5)
• AIP C4-8 value
5)
• Element temperature 1 ... 24
5)
• HART device 1...15 PV
5)
• HART device 1 ... 15 PV mA
5)
• HART device 1 ... 15 PV %
5)
• HART device 1 ... 15 SV
5)
• HART device 1 ... 15 TV
5)
• HART device 1 ... 15 QV
5)
Factory setting Tank level
Additional information
Read access Operator
Write access Maintenance
Failure mode 
Navigation  Setup → Advanced setup → Input/output → Analog I/O → Failure mode
Prerequisite Operating mode (→  138) = 4..20mA output or HART slave +4..20mA output
Description Defines the output behavior in case of an error.
Selection • Min.
• Max.
• Last valid value
• Actual value
• Defined value
Factory setting Max.
Additional information
Read access Operator
Write access Maintenance
5) Visibility depends on order options or device settings