Endress+Hauser Proline Promag L 400 - Page 29

Proline Promag L 400 Electrical connection
Endress+Hauser 29
EtherNet/IP
Device plug for signal transmission (device side)
3
2
4
1
A0016812
Pin Assignment Coding Plug/socket
1 + Tx D Socket
2 + Rx
3 - Tx
4 - Rx
7.1.5 Preparing the measuring device
1. Remove dummy plug if present.
2. If measuring device is delivered with cable glands:
Observe cable specification (→  25).