Endress+Hauser Proline Promag L 400 - Post-Connection Check

Proline Promag L 400 Operation options
Endress+Hauser 45
8.2.2 Navigation view
Status area
The following appears in the status area of the navigation view in the top right corner:
• Of the submenu
– The direct access code for the parameter you are navigating to (e.g. 0022-1)
– If a diagnostic event is present, the diagnostic behavior and status signal
• In the wizard
If a diagnostic event is present, the diagnostic behavior and status signal
Display area
Icons for menus
Operation Setup Diagnostics Expert
Icons for submenus, wizards, parameters Lock symbols
Submenu Wizard Parameters within a wizard Parameter locked
8.2.3 Editing view
Input mask
Operating symbols in the numeric editor
Confirms selection. Moves the input position one position
to the left.
Exits the input without applying the
changes.
.
–
Inserts decimal separator at the input
position.
Inserts minus sign at the input
position.
Clears all entered characters.
Operating symbols in the text editor
Confirms selection. Switches to the selection of the
correction tools.
Exits the input without applying the
changes.
Aa1
Clears all entered characters. Toggle
• Between upper-case and lower-case
letters
• For entering numbers
• For entering special characters