Endress+Hauser Proline Promag W 400 - Incoming Acceptance and Product Identification; Incoming Acceptance

Proline Promag W 400 Installation
Endress+Hauser 13
Installation in partially filled pipes
A partially filled pipe with a gradient necessitates a drain-type configuration.
³ 5 × DN
³ 2 × DN
A0017063
Orientation
The direction of the arrow on the sensor nameplate helps you to install the sensor according
to the flow direction.
An optimum orientation position helps avoid gas and air accumulations and deposits in the
measuring tube.
Vertical
A0015591
Optimum for self-emptying pipe systems and for use in conjunction with empty pipe
detection.