Endress+Hauser Proline Promag W 400 - Setting the Operating Language; Configuring the Measuring Device

Commissioning Proline Promag W 400
60 Endress+Hauser
10.4 Setting the operating language
Factory setting: English or ordered local language
X X X X X X XX X
20.50
Operation
Setup
Main menu
0104-1
Language
English
Español
Français
Language
English
Deutsch
Ã
0104-1
Ã
Español
Français
Language
English
Deutsch
0104-1
Betrieb
Setup
Hauptmenü
Sprache
Deutsch
0104-1
XXXX
A0013996
 15 Taking the example of the local display
10.5 Configuring the measuring device
The Setup menu and its guided wizards enable fast commissioning of the measuring device.
The wizards systematically guide the user through all the parameters required for
configuration, such as parameters for measurement or outputs.
The wizards available in the particular device can vary on account of the device version
(e.g. communication method).
Wizard/submenu Meaning
Status input Configure the status input
Current output 1 Configure the current output
Pulse/frequency/switch output 1 to 2 Configure the pulse/frequency/switch output
Display Configure the measured value display