Endress+Hauser Proline Promag W 400 - Page 15

Proline Promag W 400 Installation
Endress+Hauser 15
If operating outdoors:
• Install the measuring device in a shady location.
• Avoid direct sunlight, particularly in warm climatic regions.
• Avoid direct exposure to weather conditions.
Temperature tables
Observe the interdependencies between the permitted ambient and fluid temperatures
when operating the device in hazardous areas.
For detailed information on the temperature tables, see the separate document entitled
"Safety Instructions" (XA) for the device.
System pressure
A0015594
Furthermore, install pulse dampers if reciprocating, diaphragm or peristaltic pumps are
used.
Vibrations
It is recommended to mount the sensor and transmitter separately.
L
A0016266
 3 Measures to avoid device vibrations (L > 10 m (33 ft))