Endress+Hauser Proline Promag W 400 - Page 31

Proline Promag W 400 Electrical connection
Endress+Hauser 31
3.
574
37
E1
E2
GND
E
42
41
A0021527
 9 Sensor: connection module
7.2.2 Connecting the transmitter
L
WARNING
Housing degree of protection may be voided due to insufficient sealing of the housing.
‣
Screw in the screw without using any lubricant. The threads on the cover are coated with a
dry lubricant.
Tightening torques for plastic housing
Housing cover fixing screw 1.3 Nm
Cable entry 4.5 to 5 Nm
Ground terminal 2.5 Nm