Endress+Hauser Proline Prosonic Flow B 200 - Page 28

Operation options Proline Prosonic Flow B 200
28 Endress+Hauser
8.2.1 Operational display
Status area
Status signals
A0013956 A0013959 A0013958 A0013957
Failure Function check Out of specification Maintenance required
Diagnostic behavior Locking Communication
A0013961 A0013962
A0013963
A0013965
Alarm Warning Device locked Remote operation enabled
Display area
Measured variables
Symbol Meaning
A0013711
• Volume flow
• Corrected volume flow
A0016223
Energy flow
A0016225
Methane fraction
A0013710
Mass flow
A0016224
Calorific value
A0016226
Wobbe index
A0013947
Temperature
A0013943
Totalizer

The measurement channel number indicates which of the three totalizers is displayed.
A0013945
Output

The measurement channel number indicates which of the two current outputs is
displayed.
Symbols for measurement channel numbers
A0016325
Measurement channel 1 to 4
The measurement channel number is displayed only if more than one channel is present for the same measured
variable type (e.g. Totalizer 1 to 3).