Endress+Hauser Proline Prosonic Flow B 200 - Page 29

Proline Prosonic Flow B 200 Operation options
Endress+Hauser 29
Symbols for diagnostic behavior
The diagnostic behavior pertains to a diagnostic event that is relevant to the displayed measured variable.
For more information about the symbols, refer to the "Status area" section (→  28)
8.2.2 Navigation view
Status area
The following appears in the status area of the navigation view in the top right corner:
• Of the submenu
– The direct access code for the parameter you are navigating to (e.g. 0022-1)
– If a diagnostic event is present, the diagnostic behavior and status signal
• In the wizard
If a diagnostic event is present, the diagnostic behavior and status signal
Display area
Icons for menus
A0013973
A0013974 A0013975 A0013966
Display/operat. Setup Diagnostics Expert
Icons for submenus, wizards, parameters Lock symbols
A0013967 A0013968
A0013972 A0013963
Submenu Wizard Parameters within a wizard Parameter locked
8.2.3 Editing view
Input mask
Operating symbols in the numeric editor
A0013985
A0016621
A0013986
Confirms selection. Moves the input position one position
to the left.
Exits the input without applying the
changes.
.
A0016619
–
A0016620
A0014040
Inserts decimal separator at the input
position.
Inserts minus sign at the input
position.
Clears all entered characters.
Operating symbols in the text editor
A0013985 A0013987 A0013986
Confirms selection. Switches to the selection of the
correction tools.
Exits the input without applying the
changes.