Storage and transport Proline Prowirl R 200
10 Endress+Hauser
5 Storage and transport
5.1
Storage conditions
Observe the following notes for storage:
• Store in original packaging.
• Do not remove protective covers or protective caps installed on process connections.
• Protect from direct sunlight.
• Storage temperature:
– All components apart from the display modules: –50 to +80 °C (–58 to +176 °F)
– Display modules:–40 to +80 °C (–40 to +176 °F)
• Store in a dry and dust-free place.
• Do not store outdoors.
5.2 Transporting the product
!
WARNING
Center of gravity of the measuring device is higher than the suspension points of
the webbing slings.
Risk of injury if the measuring device slips.
‣
Secure the measuring device from rotating or slipping.
‣
Observe the weight specified on the packaging (stick-on label).
‣
Observe the transport instructions on the stick-on label on the electronics
compartment cover.
A0015606
Observe the following notes during transport:
•
Transport the measuring device to the measuring point in the original packaging.
• Do not remove protective covers or protective caps installed on process connections.
They prevent mechanical damage to the sealing surfaces and contamination in the
measuring tube.
To Next Page
Loading...
