Endress+Hauser Proline Prowirl R 200 - Connecting the Measuring Device

Electrical connection Proline Prowirl R 200
32 Endress+Hauser
7.2 Connecting the measuring device
NOTICE
Limitation of electrical safety due to incorrect connection!
‣
For use in potentially explosive atmospheres, observe the information in the device-
specific Ex documentation.
7.2.1
Connecting the transmitter
The connection of the transmitter depends on the following order codes:
Connection version: terminals or device plug
Connection via terminals
10(0.4)
mm(in)
20 mm3mm
A0013836
‣
Connect the cable in accordance with the terminal assignment . For HART
communication: When connecting the cable shielding to the ground terminal,
observe the grounding concept of the facility.