Endress+Hauser Proline Prowirl R 200 - Defining the Tag Name; Protecting Settings from Unauthorized Access

Proline Prowirl R 200 Commissioning
Endress+Hauser 51
Wizard Meaning
Current output 1 Configuring output 1
Pulse/frequency/switch output Configuring the selected output type
Display Configuring the measured value display
Output conditioning Defining the output conditioning
Low flow cut off Configuring the low flow cut off
10.5 Defining the tag name
To enable quick identification of the measuring point within the system, you can enter
a unique designation using the "Device tag" parameter and thus change the factory
setting.
Navigation
"Setup" menu
Parameter overview with brief description
Parameters Description User entry Factory setting
Device tag Enter tag for measuring
point.
Max. 32 characters, such
as letters, numbers or
special characters (e.g. @,
%, /).
Prowirl
10.6 Protecting settings from unauthorized access
The following options exist for protecting the configuration of the measuring device
from unintentional modification after commissioning:
•
Write protection via access code (→  51)
• Write protection via write protection switch (→  52)
• Write protection via keypad lock (→  47)
10.6.1 Write protection via access code
With the customer-specific access code, the parameters for the measuring device
configuration are write-protected and their values can no longer be changed via local
operation.
Navigation
"Setup" menu → Advanced setup → Administration → Def. access code
Structure of the submenu
Define access code
→
Define access code
Confirm access code