Application
Proservo NMS8x Series intelligent tank gauges are designed for high accuracy liquid
level measurement in storage and process applications. They fulfill the exacting
demands of tank inventory management, inventory control, custody transfer, loss
control, total cost saving, and safe operation.
Typical areas of application
• Precise level, interface, and density measurement of oil (fuels), LPG/LNG,
petrochemical, chemical, and alcohol
• Tank mounted intelligence makes NMS8x ideal for single or multi-task
installation, covering a wide range of measurement functions including Liquid
level, Interface level, Spot density, Density profile, Tank bottom, and Water dip and
integrating a wide range of tank sensor measurement functions including Water
level, Temperature, and Pressure.
Your benefits
• SIL2 certified (Min, Max, Continuous level)
• SIL3 (in preparation)
• Measures liquid level to an accuracy of +/- 0.4 mm (0.016 in)
• Measurement of up to two interface levels and density of up to three liquid phases
• Liquid density profiling of up to 50 points throughout the tank or upper layer,
configurable.
• Wetted parts are completely separated from the electronic circuit
• Tank top mounting with 3” flange
• Wide range of output signals including V1, Modbus RS 485, and HART protocol
• Material and pressure rating of the wetted parts can be selected.
• Suitable for atmospheric and high pressure applications up to 25 bar/2.5 MPa/
362 psi
• Integration of e.g. temperature, water level, pressure, overfill prevention sensor
• Direct connection of spot or average temperature sensor
• Robust IP66/68, NEMA Type 4x/6P enclosure
• Operation and display in a wide variety of local languages
• Easy commissioning, maintenance, and diagnostics via FieldCare
Products
Solutions Services
Technical Information
Proservo NMS81
Tank Gauging
TI01249G/00/EN/02.17
71318275
To Next Page
Need help?
General
