Proservo NMS81
Endress+Hauser 47
Ordering information
Ordering information
Detailed ordering information is available from the following sources:
• In the Product Configurator on the Endress+Hauser website: www.endress.com -> Click "Corporate"
-> Select your country -> Click "Products" -> Select the product using the filters and search field ->
Open product page -> The "Configure" button to the right of the product image opens the Product
Configurator.
• From your Endress+Hauser Sales Center: www.addresses.endress.com
Product Configurator - the tool for individual product configuration
• Up-to-the-minute configuration data
• Depending on the device: Direct input of measuring point-specific information such as
measuring range or operating language
• Automatic verification of exclusion criteria
• Automatic creation of the order code and its breakdown in PDF or Excel output format
• Ability to order directly in the Endress+Hauser Online Shop
Marking
Option of ordering feature 895
"Marking"
Meaning
Z1 Tagging (TAG)
Z2 Bus address
Optionally, the device can be ordered with a specific tagging and/or bus address according to the
table above. When the respective option is selected, the tag or bus address must be defined in an
additional specification.
To Next Page
Loading...
Need help?
General
