Proservo NMS81
8 Endress+Hauser
following density measurements are supported: single-point (spot measurements), as well as profile
measurements of all liquid(s) in a tank.
The choice of the most suitable displacer depends on the liquid conditions and measurement
functions. These can be classified as follows:
• Single measurement value only, e.g. level, interface, or density
• Multiple measurement application, e.g. level, interface, and density
Measurement terminology
A0026727
4 NMS8x with standard level, I/F x 2, Tank bottom and spot density x 3 measurement
1 Upper density
2 Middle density
3 Lower density
4 Tank bottom
5 Lower I/F
6 Upper I/F
7 Level
To Next Page
Loading...
Need help?
General
