Endress+Hauser Prosonic S FMU90 - Page 13

Prosonic S FMU90 Flow Measurement PROFIBUS Wiring
Endress+Hauser 13
3.2.2 Several instruments mounted side by side
L00-FMU90xxx-04-00-00-xx-012
• The cables can be inserted into the housing from above or from below.
• The pictures show the smallest housing version but are valid for the larger versions as well.
• If the instruments are mounted next to each other and if the sensor cables run in parallel, the
synchronization terminals (39 and 40) must be interconnected (→ ä 14, "Terminal
assignment" and → ä 24, "Synchronization line").
1.
2.
3.