Mounting Prosonic S FMU90 Flow Measurement PROFIBUS
6 Endress+Hauser
2Mounting
2.1 Incoming acceptance, storage
2.1.1 Incoming acceptance
Check the packing and contents for any signs of damage. Check the shipment, make sure
nothing is missing and that the scope of supply matches your order.
2.1.2 Storage
Pack the measuring instrument so that is protected against impacts for storage and transport.
The original packing material provides the optimum protection for this.
The permissible storage temperature is -40 to +60 °C (-40 to +140 °F).
2.2 Installation
2.2.1 Installation conditions of the field housing
Weather protection
In order to avoid excessive sunlight exposure, the instrument should be mounted in a position
which is protected against direct sunlight or a protection cover should be applied.
Overvoltage protection
In order to protect the Prosonic S against overvoltage (especially if mounted outdoors),
connection of an overvoltage protection is recommended.
Pipe mounting
A mounting plate is available for mounting of the field housing to 1" to 2" pipes.
Wall mounting
A mounting help for wall mounting is supplied. It also serves as drilling template. The mounting
help should be mounted on a flat surface and may not become distorted.
To Next Page
Loading...
