Endress+Hauser Prosonic S FMU90 - 2.6 Certificates and approvals; 2.7 Registered trademarks

Prosonic S FMU90
Endress + Hauser 11
Electrical connection
Terminal compartment of the
field housing
The field housing has a separate terminal compartment. It can be opened after loosening the four screws of the
lid.
L00-FMU90xxx-04-00-00-xx-002
For easier wiring, the lid can be completely removed by unplugging the display plug (1) and pulling off the
hinges (2):
L00-FMU90xxx-04-00-00-xx-009
Cable entries of the field
housing
On the bottom of the housing the following openings for cable entries are prestamped:
• M20x1,5 (10 openings)
• M16x1,5 (5 openings)
• M25x1,5 (1 opening)
A suitable cutting device must be used for cutting out the openings.
1
2
1
1
1
3
1
2