Endress+Hauser Prosonic S FMU90 - Operation; 5.1 Operating options; 5.2 Operation via the display and operating module

Prosonic S FMU90
Endress + Hauser 35
Supplementary documentation
Innovation booklet IN 003
Ultrasonic measurement - the solution for your application
Technical Information TI 396F
Technical Information for the ultrasonic sensors FDU91/FDU92/FDU93/FDU95/FDU96
Operating instructions
(for transmitter FMU90)
Depending on the instrument version, the following operating instructions are supplied with the Prosonic S
FMU90:
These operating instructions describe installation and commissioning of the respective version of the
Prosonic S. It contains those functions from the operating menu, which are required for a standard measuring
task. Additional functions are contained in the "Descripiton of Instrument Functions" (BA 290F, see below).
Description of Instrument
Functions
BA290F
contains a detailed description of all functions of the Prosonic S and is valid for all instrument versions. A PDF
file of this document can be found
• on the CD-ROM of the "ToF-Tool - FieldTool Package", which is supplied together with the instrument
• in the internet at "www.endress.com"
Operating instructions Output Application Instrument version
BA 288F
HART
• level measurement
• alternating pump control
• screen and rake control
FMU90 - *******1****
FMU90 - *******2****
BA 289F
•flow measurement
• backwater and dirt detection
• totalizers and counters
FMU90 - *2*****1****
FMU90 - *4*****1****
FMU90 - *2*****2****
FMU90 - *4*****2****
BA 292F
PROFIBUS DP
• level measurement
• alternating pump control
• screen and rake control
FMU90 - *******3****
BA 293F
•flow measurement
• backwater and dirt detection
• totalizers and counters
FMU90 - *2*****3****
FMU90 - *4*****3****