Commissioning Prosonic T
22 Endress+Hauser
The "Basic setup" (00) function group lists all the functions which are required for a standard
measurement task to commission the device. When you have completed your input for a
function, the next function appears automatically. In this way, you are guided through the
complete calibration.
5.5 Measuring point settings
5.5.1 Function "tank properties" (002)
In this function, select one of the following options:
Selection:
• dome ceiling (→ A)
• horizontal cyl. (→ B)
•bypass (→ C)
• stilling well (ultrasonic guide pipe) (→ C)
• no ceiling (→ D)
•sphere (→ E)
• flat ceiling (→ F)
L00-FMU4xxxx-14-00-06-de-001
⇒
A
BC
DE
F
To Next Page
Loading...
