Endress+Hauser Prosonic T FMU30 - Envelope Curve with Device Display

Prosonic T Commissioning
Endress+Hauser 29
5.7.6 Return to group selection
After the basic setup, an evaluation of the measurement with the aid of the envelope curve
("display" (09) function group) is recommended.
5.8 Envelope curve with device display
After the basic setup, an evaluation of the measurement with the aid of the envelope curve
"envelope curve" (0E) function group) is recommended.
5.8.1 Function "plot settings" (0E1)
Here you can select which information is shown on the display:
• envelope curve
• substracted signal
• mapping
!
Note!
The FAC and the interference echo suppression (map) are explained in BA388F "Prosonic T -
Description of Instrument Functions"
⇒
⇓
After 3 s, the following
message appears
⇒