Endress+Hauser Prothermo NMT81 - Page 56

Commissioning Prothermo NMT81
56 Endress+Hauser
7.3.1 Upper and lower view areas
The layout of the items in the upper view area [3] and the lower view area [4] can be changed
by dragging and dropping the desired items in the display area above.
For the category of (PV) and (QV), the desired items to be displayed in the upper or lower
view area can be selected via the “Output settings” part of the commissioning procedure. For
the category of (QV), the items are selectable but not displayed on either of the upper or lower
view areas. For more details for setting of the upper and lower views, see next article
“Commissioning”.
A0044586
 39 Upper and lower view areas