Endress+Hauser RA33 - 5.2.1 Operating Elements; 5.2.2 Function for Entering a Value for the Preset Counter; 5.2.3 Display

Operation RA33
22 Endress+Hauser
5Operation
5.1 General notes for operation
The batch controller can be configured using keys or using the "FieldCare" operating
software.
The operating software, including the interface cable, is available as an order option,
i.e. it is not part of the basic scope of delivery.
The configuration is locked if the device is locked by the locking switch or the user
code.
5.2 Display and operating elements
a0014276
Fig. 21: Display and operating elements of the batch controller
1 LED green, "Operation"
2 LED red, "Fault indicator"
Function keys:
3Start
4Stop
5 Numerical keypad
6 Start printing
Interface:
7 USB connection for configuration
Operating keys:
8 -, +, E
Display:
9160 x80 DOT matrix display
!
Note!
Green LED for voltage, red LED for alarm/error. Green LED is always illuminated as soon as
power is supplied to the device.