RA33 Operation
Endress+Hauser 25
5.3 Operating matrix
For a complete overview of the operating matrix including all configurable parameters, see
’Appendix’ section in the operating instructions on CD-ROM.
Language Drop-down list with all available operating languages. Select the language of the
device.
Display/operation menu • Select the group for display (automatic change or fixed display group)
• Setting for the display brightness and contrast
• Display the stored analyses (Day, Month, Year, Billing date, Totalizer) and batch
reports
• Enter a value for the preset counter
• Recipe selection
Setup menu In this Setup, you can configure the parameters for quick commissioning of the
device. Advanced setup includes all important parameters for configuring the
instrument function.
•Units
•Signal type
• Pulse value, value (for pulse signal type) or
•Start of measuring range (for current signal
type)
• End of measuring range (for current signal
type)
•Unit
• Counter unit
• Date and time
Parameters for
quick commissioning
• Advanced setup (settings that are not essential for basic operation of the device)
Special settings can be configured via "Expert".
Diagnostics menu Device information and service functions for a swift device check.
• Diagnostic messages and list
• Event logbook
• Device information
• Simulation
• Measured values, outputs
To Next Page
Loading...
