Endress+Hauser RIA14 - Page 35

RIA14 Operating the field display unit
Endress+Hauser 35
5.2.1 Navigation
The operating fields are split into 2 levels.
Menu: Various menu items can be selected on the menu level. The individual menu items are
an aggregation of the associated operating functions.
Operating function: An operating function can be regarded as an aggregation of the operating
parameters. The operating functions are used to operate and configure the device.
Operating keys:
'E' Enter key: Press and hold down the E key for longer than 3 seconds to enter the
programming menu.
– Selecting operating functions.
– Accepting values.
– If the E key is pressed for longer than 3 seconds, the system returns directly to the Home
position. Beforehand, you are asked whether the data entered up to now should be saved.
– Saving data entered.
Selection keys ’+/-’:
– Selecting the menus.
– Configuring parameters and numerical values.
– After selecting the operating function, the value is entered or the setting changed by pressing
the + or - keys.
!
Note!
If the keys are pressed for an extended period, the digits are changed with increasing speed.
!
Note!
If the + or - keys are pressed in the "Program Name" and "Program Version" operating position,
the display is scrolled horizontally as these positions (7-digit) cannot be displayed completely in
the 14-segment display.