Endress+Hauser RIA14 - Page 36

Operating the field display unit RIA14
36 Endress+Hauser
5.2.2 Programming in the operating matrix
a0011262-en
Fig. 11: Programming the field display unit
w Enter the operating matrix
x Menu (select with "+" or "-" key)
y Select the operating functions
z Enter parameters in the edit mode (enter/select data with "+" or "-" and accept with "E").
{ Go directly to the Home position.
–Beforehand, you are asked whether the data entered up to now should be saved.
| Exit the menus with "+/-". You are asked whether the data entered should be saved.
} Prompt to save data (select YES/NO with "+" or "-" key and confirm with "E").
The operating matrix can be found in Section 5.3.