Endress+Hauser RIA15 - Spare Parts; Software History and Overview of Compatibility

Troubleshooting RIA15
44 Endress+Hauser
Code Class Description Solution
7 Error In the write-protected
mode
Check write protection in the
FMR20
14 Error Span too small Check basic settings →  40
16 Error Access restricted Check HART® settings and
firmware in the FMR20
29 Error Invalid span Check basic settings →  40
32 Error Busy Try again
9.3 Spare parts
1
4
4 4
4
4
2
4
2
1
3
3 3
3
A0018882
 16 Spare parts of the process display unit
Item No. Description Order number
1 Mainboard HART® XPR0005-ABA
2 LCD module XPR0006-A1
3 Small parts set for panel-mount housing (5-pin plug-in
terminal, seal on front frame, 2x fastening clip)
XPR0006-A2
4 Small parts set for field housing (5-pin plug-in terminal, seal
on cover, 2x cover hinge, grounding connection on bottom,
cover screws, grounding lug)
XPR0006-A3
9.4 Software history and overview of compatibility
Release
The firmware version on the nameplate and in the Operating Instructions indicates the
device release: XX.YY.ZZ (example 1.02.01).
XX Change to main version.
No longer compatible. The device and Operating Instructions change.
YY Change to functions and operation.
Compatible. The Operating Instructions change.
ZZ Fixes and internal changes.
No changes to the Operating Instructions.