EasyManua.ls Logo

Endress+Hauser RIA15 - Page 54

Endress+Hauser RIA15
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical data RIA15
54 Endress+Hauser
Field housing
Aluminum or plastic (PBT with steel fibers, antistatic)
14.7 Operability
Local operation The device is operated with the 3 operating keys on the front of the housing. The device
setup can be disabled with a 4-digit user code. If the setup is disabled, a padlock symbol
appears on the display when an operating parameter is selected.
A0017716
Enter key; calling up the operating menu, confirming the option/setting parameters in the
operating menu
A0017714
Selecting and setting values in the operating menu; pressing the - and + keys simultaneously
takes the user back up a menu level. The configured value is not saved (ESC)
A0017715
14.8 Certificates and approvals
CE mark The measuring system meets the legal requirements of the applicable EC guidelines. These
are listed in the corresponding EC Declaration of Conformity together with the standards
applied. Endress+Hauser confirms successful testing of the device by affixing to it the CE
mark.
EAC mark The product meets the legal requirements of the EEU guidelines. The manufacturer
confirms the successful testing of the product by affixing the EAC mark.
Ex approval Information about currently available Ex versions (ATEX, FM, CSA, etc.) can be supplied by
your E+H Sales Center on request. All explosion protection data are given in a separate
documentation which is available upon request.
Functional safety SIL interference freeness according to EN61508 (optional)
Marine approval GL marine approval (optional)
HART
®
communication
The display unit is registered by the HART
®
Communication Foundation. The device meets
the requirements of the HART
®
Communication Protocol Specifications, May 2008,
Revision 7.1. This version is downwards compatible with all sensors/actuators with HART
®
versions ≥ 5.0.
Other standards and
guidelines
IEC 60529:
Degrees of protection provided by enclosures (IP code)
IEC 61010-1: 2010 cor 2011
Safety requirements for electrical equipment for measurement, control and laboratory
use
NAMUR NE21, NE43
Association for Standards for Control and Regulation in the Chemical Industry

Other manuals for Endress+Hauser RIA15

Related product manuals