Turbimax CUS71D Troubleshooting
Endress+Hauser 27
9.3 Return
If the sensor has to be repaired, please return it cleaned to the sales center responsible.
Please use the original packaging, if possible.
Before returning the device, please clarify all formalities - such as obtaining an identification number
- with your sales center.
Please enclose the completed "Declaration of Hazardous Material and De-Contamination" (copy the
second last page of these Operating Instructions) with the packaging and the transportation
documents. No repair without completed declaration!
9.4 Disposal
The device contains electronic components and must therefore be disposed of in accordance with
regulations on the disposal of electronic waste.
Please observe local regulations.
To Next Page
Loading...
Need help?
General
