• SHUTTER: NORMAL/100/120/250/500/1000/2000/5000/10000
You can set shutter speed in this menu.
• BRIGHT: 0~90
The brightness value is changeable from 0 to 90.
• BACK LIGHT: ON/OFF
Back light compensation function is active when
ON is set.
3.6.4 L/L Control Menu
L/L CONTROL MENU
MODE: INTERNAL
PHASE:
SAVE AND EXIT
EXIT
/ : move cursor up and down
/ : move cursor left and right or select
ESC : exit current menu
3.6.4.1 Set Line Lock Control Options
• MODE: INTERNAL/EXTERNAL
You can select line lock source whether internal or external.
• PHASE: 0~620 (PAL) / 0~519 (NTSC)
If you selected external line lock source, you can control phase delay.
To Next Page
Loading...
