3.7.2 Tilt Auto Flip
Allows the dome camera to automatically turn 180 degrees when the camera tilts to
its lowest position.
When the camera reaches the floor directly above the moving object, it will stop.
Release the
Joystick handle instantly and then pull down to run the flip function.
The tracking speed will be the same as previous.
3.7.3 Home Function Menu
MODE: ON/OFF
FUNCTION TYPE: PRESET / TOUR / AUTO SCAN
FUNCTION NUMBER: XX
DWELL TIME: 5 ~ 600sec
The Home Function can be set so that the camera automatically goes to
preset, tour, auto scan after the keyboard controller has been idle for an
amount of time. For example, if the
Joystick controller is idle for 10 seconds, the
camera goes to preset 1.
HOME FUNCTION MENU
MODE: OFF
FUNCTION TYPE:
FUNCTION NUMBER:
DWELL TIME:
SAVE AND EXIT
EXIT
To Next Page
Loading...
