Enerdrive DC2DC - 1. INTRODUCTION

1. INTRODUCTION
Thank you for purchasing the Enerdrive ePOWER DC2DC Battery Charger. With our state
of the art, easy to use design, this product will oer you reliable service for providing a
multistage, multi-input battery charger to charge the dierent types of batteries you have
installed in either your home, boat, caravan, 4WD or commercial vehicle. This manual will
explain how to use this unit safely and eectively.
Please Keep This Manual For Future Reference
For safe and optimum performance, the Enerdrive ePOWER DC2DC Battery Charger must
be used properly. Carefully read and follow all instructions and guidelines in this manual
and give special attention to the CAUTION and WARNING statements.
Disclaimer
While every precaution has been taken to ensure the accuracy of the contents of this guide,
Enerdrive assumes no responsibility for errors or omissions. Note the specications and
product functionality may change without notice.
Important Note
Please be sure to read the entire manual before using your Enerdrive ePOWER DC2DC Battery
Charger. Misuse may result in damage to the unit and/or cause harm or serious injury. Read
manual in its entirety before using the unit and save manual for future reference.
Product Numbers
ePOWER DC2DC Battery Charger Series
Product Number Product Description
EN3DC30 ePOWER DC2DC Battery Charger 12V / 30Amp
*ePOWER DC2DC Battery Charger Owners Manual Rev. 2.02. This Manual applicable to all units with serial number
prex EN.
Service Contact Information
ENERDRIVE PTY LTD
Unit 11, 1029 Manly Road Tingalpa, Queensland, Australia 4173
Ph: 1300 851 535 / Fax: 07 3390 6911
Email: support@enerdrive.com.au
Web: www.enerdrive.com.au
Enerdrive ePOWER DC2DC Battery Charger Owners Manual (Rev. 2.02)
Page 4