Enerdrive DC2DC - 8. SPECIFICATIONS; Output and Input Specifications; Charger DC Output (CH1) Details; Dimensions and Weight

8. SPECIFICATIONS
Output Rating
Output Voltage 12V Nominal (8.0V min)
Output Current (Maximum) 30A
Output Power 465W
Charger DC Output (CH1):
Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
Charger Voltage Range 13.8V – 15.5V
Float Voltage Range 13.0V – 13.8V
Charger Current (User Selectable) 30/20/10/5A
Equalize Voltage (Flooded Battery) 15.5V
Equalize Charging Current 10% of Bulk Current Setting
Charging Control Three Stages
DC Output Bank Single
Current draw from CH1 when in use
< 70 mA with remote
< 50 mA without remote
Battery Temperature Setting
Low/ Normal/ High
(Battery Temperature Sensor Standard)
Eciency 95%
INPUT Rating (CH2 - MPPT Solar)
Input Voltage 14.5 - 45VOC
Maximum Solar Input 500W
INPUT Rating (CH3 - Start/Alternator)
Input Voltage 10.5 - 16VDC / 21 - 32VDC
Dimensions
Height x Width x Depth 242mm x 172mm x 74mm
Unit Weight 1.85 Kg
Shipping Weight 2.17 kg
Note: Specications are subject to change without notice.
Enerdrive ePOWER DC2DC Battery Charger Owners Manual (Rev. 2.02)
Page 30