Engcon DC2 QSC - 5.1.7.2. Editing Selected Tool Parameters; 5.1.7.3. Rotation Settings Display; 5.2. Tiltrotator Quick Hitch (QH) Operation; 5.2.1. Connecting the Tool (Hydraulic Lock)

5 Operation
5.1.7.2. Edit selected
CM
ROTATION
TILT
EXTRA1
EXTRA2
(SELECT)
EXIT
5.1.7.3. Rotation
CM
ROTATION
(OK)
SPEED
UP RAMP
DOWN RAMP
100%
0%
0%
5.2. Tiltrotator quick hitch (QH)
5.2.1. Connecting the tool, hydraulic lock
5.2.1.1. Opening the tiltrotator quick hitch (QH)
REMARKS
Machine hydraulics must be activated in order for the QSC
opening and closing function to work.
25