6 Starting the system
6. Starting the system
WARNING
Before starting and calibrating the system, make sure
there is sufficient room to manoeuvre as there is a risk
of the machine moving in unexpected ways. Risk of
injury and damage to property.
WARNING
If you have any doubts concerning the safety aspects
of your knowledge, the equipment or work, contact
a dealer or engcon Nordic AB. Incorrect installation
affect safety.
IMPORTANT
Assembly and installation may only be carried out at a
workshop authorised by the manufacturer. Changes to the
assembly may not be carried out without the manufacturer’s
consent.
IMPORTANT
Maintenance and repair of the electrical system may only be
carried out by professionally qualified persons.
6.1. Download the latest version of MicroConf
engcon DC2 is configured using a computer and the MicroConf DC2 software. The
software can be downloaded at https://software.engcon.com
39
To Next Page
Loading...
