Engcon S60 - Locking Hydraulics

4 Installation
Rating plate content:
Part number
Type designation
Serial number
Year of manufacture
Weight
Max jacking point
Max hydraulic pressure
Figure 3.
4.2. Locking hydraulics
The following mounting and installation instructions assume the excavator to be equipped
with the appropriate locking hydraulics. If the base machine does not have locking
hydraulics, contact engcon for reference to the recommended installation kit.
DANGER
Do not exceed tipping load limits. The weight of the
product and the increased reach may impair stability.
Risk of personal injury and damage to property.
WARNING
If you have any doubts concerning the safety aspects
of your knowledge, the equipment or work, contact
a dealer or engcon Nordic AB. Incorrect installation
affect safety.
IMPORTANT
Assembly and installation may only be carried out at a
workshop authorized by the manufacturer. Changes to the
assembly may not be carried out without the manufacturer’s
consent.
13