Engcon S60 - Q-Safe; On Completion

4 Installation
1
1
1
1
Position
Part number
Description
1
711524
Pipe Plug DIN 906 1/2" 180156
4.8. Q-Safe
See separate installation instructions.
Also available on the website or by contacting engcon.
4.9. On completion
1. Affix the warning decal supplied in a conspicuous
place that does not distract the operator.
WARNING
Replace damaged or
illegible signs and
decals before using
the machine. Risk of
personal injury and
damage to property.
2. Carry out a function check; contact your service
partner.
Figure 12.
- Run the tool functions a few times to remove any air
from the system. Important for preventing uncontrolled
movement.
- Check that the machine coupler works. Activate the
quick coupler lock.
- Check that the hoses are not subjected to pinching,
cutting or stretching.
19