6 Maintenance
WARNING
Always make sure the locking bolts protrude as
specified for the machine coupler concerned. Tools
attached to the machine coupler may only be used if
locking is properly executed. Risk of personal injury
and damage to property.
WARNING
Welding is not permitted. It can have a negative
impact on safety. Risk of personal injury and damage
to property. For welding, contact your dealer or
engcon Nordic AB.
WARNING
Replace damaged or illegible signs and decals before
using the machine. Risk of personal injury and
damage to property.
6.3. Special maintenance
6.3.1. EC-Oil
- Clean oil connections, electrical
connectors, grease connections and dirt
guards before and after use in order to
avoid oil or grease leakage and safeguard
EC-Oil function.
- If oil or grease leakage occurs despite
cleaning, we recommend face seal
replacement.
- Clean electrical connectors daily and
spray with water repellent.
28
To Next Page
Loading...
