EnGenius EAP-3660 - EAP-3660 Hardware and RF Specifications

EAP-3660 11b/g Wireless Access Point Version 1.1
Appendix A – Specifications
Hardware
Physical Interface z LAN: One 10/100 Fast Ethernet RJ-45
z Reset Button
z Power Jack
LEDs Status z Power/ Status
z LAN (10/100Mbps)
z WLAN (Wireless Connection)
Power Requirements
z Power Supply: 90 to 240 VDC ± 10％, 50/60 Hz (depends on
different countries)
z Active Ethernet (Power over Ethernet, IEEE802.3af)- 48
VDC/0.375A
z Device: 12V/1A
Regulation Certifications z FCC Part 15/UL, ETSI 300/328/CE
RF Specification
2.400～2.484 GHz
Frequency Band
Carrier sense multiple access with collision avoidance (CSMA/CA)
Media Access Protocol
Modulation Technology
z OFDM: BPSK, QPSK, 16-QAM, 64-QAM
z DBPSK, DQPSK, CCK
11 for North America, 14 for Japan, 13 for Europe
Operating Channels
Receive Sensitivity
(Typical)
z IEEE802.11g
6Mbps@ -95dBm
54Mbps@ -75dBm
z IEEE802.11b
1Mbps@ -98dBm
11Mbps@ -93dBm
Available transmit power
z IEEE802.11g
26dBm@6~24 Mbps
25dBm@36 Mbps
23dBm@48 Mbps
22dBm@54Mbps
z IEEE802.11b
27dBm@1 ~ 11Mbps
29