EnGenius EAP150 - Default Settings

14
3 Configuring Your Access Point
This section will show you how to configure the device using the web-based configuration interface.
3.1 Default Settings
Please use your Ethernet port or wireless network adapter to connect the Access Point.
Default Settings
IP Address
192.168.1.1
Username / Password
admin / admin
Operation Mode
Access Point
Wireless SSID
EnGeniusxxxxxx
Wireless Security
None
Note: xxxxxx represented in the wireless SSID above is the last 6 characters of your device MAC Address. This can be found on the device body
label and is unique for each device.