EnGenius EAP150 - Basic

29
5.2 Basic
The Basic option of the Wireless menu displays the basic wireless options of the EAP150.
Basic
Radio
Enable or Disable the EAP150’s wireless signal.
Mode
Select between Access Point or Wireless Distribution System (WDS) modes.
Band
Select the types of wireless clients that the device will accept.
Enable SSID#
Select the number of SSID’s (Wireless Network names) you would like (up to 4).
SSID#
Enter the name of your wireless network. You can use up to 32 characters.
Auto Channel
When enabled, the device will scan the wireless signals around your area and select the channel
with the least interference.