13
2.3 Computer Settings in Apple Mac OS X
• Go to System Preferences (can be opened in the Applications folder or selecting it in the Apple Menu).
• Select Network in the Internet & Network section.
• Highlight Ethernet.
• In Configure IPv4, select Manually.
• Enter an IP address that is different from the EAP300 and subnet mask then press OK.
Note: Ensure that the IP address and subnet mask are on the same subnet as the device.
For example: Device IP address: 192.168.1.1
PC IP address: 192.168.1.2 – 192.168.1.255
PC subnet mask: 255.255.255.0
• Click Apply when done.
To Next Page
Loading...
