6
WPA/WPA2/IEEE 802.1x Support Supports industry-standard wireless encryption and RADIUS
authentication.
MAC Address Filtering in Access Point mode Can be configured to grant access to only known devices based
on their MAC addresses.
User Isolation Support (Access Point mode) O Offers an additional layer of protection within the network by
isolating specific clients.
Power-over-Ethernet (IEEE802.3af) Enables the EAP300 to be powered via Ethernet cable so it can be
deployed on ceilings or in crawlspaces where electrical outlets
may not be available.
Save User Settings Enables network administrators to save their device settings so
firmware upgrades do not permanently delete previous device
settings.
SNMP Remote Configuration Management Allows remote connection to configure or manage the EAP300
easily.
QoS (WMM) support Prioritizes bandwidth-intensive and sensitive data traffic.
IPv6 Supports IPv6 addresses.
1.2 Package Contents
The EAP300 package contains the following items (Resellers and dealers require that all items must be in the package to
issue a refund):
• EAP300
• 12V/1A 100V~240V Power Adapter
• RJ-45 Ethernet Cable
• CD with User Manual
To Next Page
Loading...
