41
7.2 Wireless Security
The Wireless Security section lets you configure the EAP300's security modes: WEP, WPA-PSK, WPA2-PSK, WPA-PSK Mixed,
WPA, WPA2, and WPA Mixed. We strongly recommend using WPA2-PSK.
Note: Only in Access Point and WDS AP mode.
WEP Encryption:
WEP Encryption
Auth Type Select Open System or Shared Key.
Input type ASCII: regular text (recommended)
HEX: for advanced users
Key Length Select the desired option, and ensure the wireless clients use the same setting.
Choices are 64, 128, 152-bit password lengths.
To Next Page
Loading...
